The XPS Foam Specialists
JACKODUR® XPS Foam delivers outstanding thermal insulation, moisture resistance, and lightweight strength. This makes it a top choice for composite panel manufacturers, commercial and recreational vehicle builders, and door system fabricators.
Used across construction and transport, JACKODUR® extruded polystyrene foam boards are engineered for energy efficiency and long-term durability. The range, consisting of JACKODUR® KF and JACKODUR® Plus, offers tailored solutions to meet specific insulation and technical requirements.
JACKODUR® KF
JACKODUR® KF is a durable, moisture-resistant XPS insulation board designed for use in commercial and recreational vehicles, as well as doors. Known for its versatility, mechanical strength, and high thermal insulation, this extruded polystyrene foam is ideal for demanding environments.
Produced using a CO2-blowing agent, JACKODUR® KF achieves ultra-low global warming potential (GWP) to deliver sustainable performance in line with today’s environmental standards. Available in a range of thicknesses, widths, and lengths, JACKODUR® KF supports a variety of thermal insulation requirements while meeting tight manufacturing tolerances.
- Compressive strength: 300 kPa
- Thermal conductivity: 0.034 W/(m·K)
- Thickness: 8 mm to 240 mm
- Width: 450 mm to 1510 mm
- Length: 1000 mm to 4000mm
- Surface finish: Planed or planed and grooved
- Compressive strength: 500 kPa
- Thermal conductivity: 0.034 W/(m·K)
- Thickness: 8 mm to 240 mm
- Width: 450 mm to 1510 mm
- Length: 1000 mm to 4000mm
- Surface finish: Planed or planed and grooved
- Compressive strength: 700 kPa
- Thermal conductivity: 0.034 W/(m·K)
- Thickness: 30 mm to 240 mm
- Width: 450 mm to 1510 mm
- Length: 1000 mm to 4000mm
- Surface finish: Planed or planed and grooved
JACKODUR® PLUS
JACKODUR® Plus is engineered for applications that demand exceptional thermal insulation, such as refrigerated commercial vehicles and energy-efficient doors. With 27% better insulation performance than JACKODUR® KF, this advanced XPS foam enables thinner panels without compromising thermal efficiency, freeing up valuable internal space for compact designs.
Manufactured using an innovative HFO (hydrofluoroolefin) blowing agent, JACKODUR® Plus combines industry-leading thermal performance with a GWP of less than one. This makes it one of the most sustainable extruded polystyrene insulation products available, as it’s fully compliant with stringent environmental regulations and ideal for future-focused builds.
- Compressive strength: 300 kPa
- Thermal conductivity: 0.027 W/(m·K)
- Thickness: 14 mm to 240 mm
- Width: 450 mm to 1510 mm
- Length: 1000 mm to 4000mm
- Surface finish: Planed or planed and grooved
- Compressive strength: 400 kPa
- Thermal conductivity: 0.027 W/(m·K)
- Thickness: 14 mm to 240 mm
- Width: 450 mm to 1510 mm
- Length: 1000 mm to 4000mm
- Surface finish: Planed or planed and grooved
- Compressive strength: 500 kPa
- Thermal conductivity: 0.027 W/(m·K)
- Thickness: 30 mm to 240 mm
- Width: 450 mm to 1510 mm
- Length: 1000 mm to 4000mm
- Surface finish: Planed or planed and grooved
- Compressive strength: 700 kPa
- Thermal conductivity: 0.027 W/(m·K)
- Thickness: 40 mm to 240 mm
- Width: 450 mm to 1510 mm
- Length: 1000 mm to 4000mm
- Surface finish: Planed or planed and grooved
JACKODUR® FTD is a hot wire cut board made from blocks in thicknesses ranging from 2.8 mm. JACKODUR® FTD can be used as a thin core or intermediate layer.
JACKODUR® FT boards are milled to an exact tolerance of +/- 0.15mm, ensuring flatness crucial for composite sandwich panel production. Starting from just 8mm thickness, these XPS foam boards deliver the consistency and precision needed for high-quality panel production.
JACKODUR® FTR is a precision-engineered XPS foam board featuring surface milling and dual-sided grooving. With grooves spaced at 40mm intervals and milled to a depth and width of 2mm, the design promotes even adhesive coverage and prevents air entrapment during lamination. The surface is milled to a tolerance of +/- 0.15mm, ensuring consistent panel quality. Available from 8mm thickness, custom groove depths are available upon request.
Enquire About Extruded Polystyrene Foam Today
No matter your needs, we can help you select the right XPS solution. Contact us today.
Explore our Composite Sandwich Panel Materials
Each one of our products has been meticulously engineered to provide lightweight performance, superior durability, and exceptional thermal insulation. Utilised across vehicle manufacturing, construction, and industrial applications, our materials are distinguished by quality and performance.
Lightweight and durable, our Fibreglass (Glass Reinforced Plastic) offers exceptional corrosion and UV resistance, high impact strength, an aesthetic appearance, and versatility.
Sustainable and strong, PET foam delivers high compressive strength and thermal performance. An ideal alternative for automotive and construction panel core structures.
A state-of-the-art material incorporating continuous fibres with thermoplastic polymers, CFRTP offers an outstanding strength-to-weight ratio, superior impact resistance, and enhanced recyclability.
Lightweight and moisture-resistant with strong thermal insulation and excellent screw retention. Ideal for structural cores requiring stable and secure fixings.
Rigid and moisture-resistant, XPS provides excellent thermal insulation and long-term durability for lightweight structural applications.
Advanced bonding solutions for robust and enduring composite panels, offering exceptional durability and performance across a wide array of applications.